Parts list IRS6

IRS Rebuild Parts Check List
Series Two E Type

The following is a guide to the items which would normally be replaced during a full IRS rebuild at CJ. It also includes suggestions as to which parts might be replaced in order to achieve better performance and reliability. There will be slight variations between certain E Type models (e.g. very early E types have smaller diameter rotors, various different handbrake pads were used throughout the E Type production run, etc).

Part #	Description	Qty	Typical Retal Price
C17198	Subframe mounts	4	$24.00
C23782	Large radius bush	2	$25.00
C17146	Sml radius arm bushings	2	$6.41
QUB137	Wheel bearing kit	2	$55.00
051-2147	Rear carrier bearing	4	$17.95*
C20178	Fulcrum shaft seal	4	$0.91*
C17167	Wishbone needle bearing	8	$4.95*
C17213	Wishbone bearing seals	8	$4.05*
102-0130	Half shaft U joints	4	$17.95
12261	Output/axle bearings (late)	2	$125.00
3840	Diff pinion seal	1	$15.95
RTC-1216	Halfshaft seals	2	$9.75
C17168-1	Rear end bush (4.2) 11/8	4	$12.95
12252	Late pinion bearing	2	$24.15
ATA - 7166	Front pinion bearing	1	$21.45
12473	O ring	2	$3.20
3931	Diff cover gasket	1	$4.65
GP83	Brake pad set	1	$23.75
GP175	Handbrake pad set	1	$35.73
SP2505	Caliper rebuild kit	1	$31.74
GR112	Brake rotors (pr)	2	$43.43
C18977	Rear springs	4	$49.00**
C12456	Rear end spacer	1	$13.30

Items marked * may be substituted with a Team CJ System Bronze fulcrum bushing kit (CTBBset) at $250.00. These work and last better than the original needle bearing and seal arrangement. Items marked ** may be substituted by uprated Team CJ performance springs at $58.75.

techsupport@classicjaguar.com

Return to index of FAQ

Parts list IRS6

IRS Rebuild Parts Check List
Series Two E Type

Part #	Description	Qty	Typical Retal Price
C17198	Subframe mounts	4	$24.00
C23782	Large radius bush	2	$25.00
C17146	Sml radius arm bushings	2	$6.41
QUB137	Wheel bearing kit	2	$55.00
051-2147	Rear carrier bearing	4	$17.95*
C20178	Fulcrum shaft seal	4	$0.91*
C17167	Wishbone needle bearing	8	$4.95*
C17213	Wishbone bearing seals	8	$4.05*
102-0130	Half shaft U joints	4	$17.95
12261	Output/axle bearings (late)	2	$125.00
3840	Diff pinion seal	1	$15.95
RTC-1216	Halfshaft seals	2	$9.75
C17168-1	Rear end bush (4.2) 11/8	4	$12.95
12252	Late pinion bearing	2	$24.15
ATA - 7166	Front pinion bearing	1	$21.45
12473	O ring	2	$3.20
3931	Diff cover gasket	1	$4.65
GP83	Brake pad set	1	$23.75
GP175	Handbrake pad set	1	$35.73
SP2505	Caliper rebuild kit	1	$31.74
GR112	Brake rotors (pr)	2	$43.43
C18977	Rear springs	4	$49.00**
C12456	Rear end spacer	1	$13.30

techsupport@classicjaguar.com

Return to index of FAQ